Previous Topic

Next Topic

Install the access panel

WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them.

CAUTION: To prevent damage to electrical components, properly ground the server before beginning any installation procedure. Improper grounding can cause ESD.

CAUTION: Do not operate the server with the access panel open or removed. Operating the server in this manner results in improper airflow and improper cooling that can lead to thermal damage.

To install the component:

  1. Place the access panel on top of the server.

    Be sure all notches are in alignment.

  2. Slide the access panel toward the front of the server. The access panel locks into position.

    Installing the access panel