Removing and replacing a DIMM

CAUTION:
Failure to properly handle DIMMs can damage the DIMM components and the system board connector. For more information, see the DIMM handling guidelines in the troubleshooting guide for your product on the Hewlett Packard Enterprise website:

For specific DIMM population information, see the DIMM population guidelines on the Hewlett Packard Enterprise website (http://www.hpe.com/docs/memory-population-rules).

To identify the DIMMs installed in the server, see DIMM slot locations.

Procedure
  1. Back up all server data.
  2. Power down the server (Power down the server).
  3. Disconnect all peripheral cables from the server.
  4. Remove the system board module from the chassis (Removing the system board module from the chassis).
  5. Place the tray on a flat, level work surface.
  6. Remove the DIMM.

    To replace the component, reverse the removal procedure.