Installing the HPE Smart Storage Battery

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them.
NOTE: System ROM and firmware messages might display "energy pack" in place of "Smart Storage Battery." Energy pack refers to both HPE Smart Storage batteries and HPE Smart Storage Hybrid capacitors.
Procedure
  1. Observe the following alerts:
    WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them.
    CAUTION: To prevent damage to electrical components, properly ground the server before beginning any installation procedure. Improper grounding can cause electrostatic discharge.
  2. Back up all server data.
  3. Power down the server (Power down the server).
  4. Extend the chassis from the rack (Extending the chassis from the rack).
  5. Remove the access panel (Removing the access panel).
  6. Remove the fan cage (Removing the fan cage).
  7. Install the Smart Storage Battery, and then connect the cable.
  8. Install the fan cage.
  9. Install the access panel.
  10. Install the chassis.
  11. Power up the server.