Installing the chassis into the rack

CAUTION:

Always plan the rack installation so that the heaviest item is on the bottom of the rack. Install the heaviest item first, and continue to populate the rack from the bottom to the top.

Prerequisites

Before installing the chassis, observe all necessary warnings and cautions.

Procedure
  1. Unpack the system and remove all components from the chassis.
  2. Install the chassis and cable management arm into the rack. For more information, see the installation instructions that ship with the selected rail system.
  3. Install options in the chassis.
  4. Install all components in their original locations in the chassis.
  5. Connect the power cords to the rear of the chassis.
  6. Connect the system to the power source.
    WARNING:
    To reduce the risk of electric shock or damage to the equipment:
    • Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
    • Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
    • Unplug the power cord from the power supply to disconnect power to the equipment.
    • Do not route the power cord where it can be walked on or pinched by items placed against it. Pay particular attention to the plug, electrical outlet, and the point where the cord extends from the server.