Removing and replacing a Smart Array type-a modular controller

Prerequisites

Before you perform this procedure, make sure that you have T-15 screwdriver available.

Procedure

If installed, remove the bezel.
Power down the server.
Remove all power:
1. Disconnect each power cord from the power source.
2. Disconnect each power cord from the server.
Do one of the following:
- Extend the server from the rack.
- Remove the server from the rack.
Remove the access panel.
Disconnect all cables from the type-a controller.
Remove the Smart Array type-a modular controller.

To replace the component, reverse the removal procedure.