Software Management

Maintaining the Brocade 16Gb FC Switch Module

Powering on and off

Interpreting LED activity

LED patterns

POST and boot specifications

About the reset button

Replacing a faulty Brocade 16Gb FC Switch Module

Management features

The management tools built into the Brocade 16Gb FC Switch Module (listed in Brocade 16Gb FC Switch Module management features) can be used to monitor fabric topology, port status, physical status, and other information used for performance analysis and system debugging.

When running IP over FC, these management tools must be run on both the Fibre Channel host and the switch, and must be supported by the FC host driver. For a list of FC hosts supported by the Brocade 16Gb FC Switch Module, contact your Hewlett Packard Enterprise representative.

Brocade 16Gb FC Switch Module management features
Management toolOut-of-band supportIn-band support
CLI—Run up to two admin sessions and four user sessions simultaneously. For more information, see the latest version of the Fabric OS Administrator Guide and the Fabric OS Command Reference Guide.Ethernet or serial connectionIP over FC
Advanced Web Tools—For information, see the latest version of the Web Tools Administrator's Guide. Ethernet connectionIP over FC
Standard SNMP applications—For information, see the latest version of the Fabric OS MIB reference guide.Ethernet connectionIP over FC
Management Server—For more information, see the latest version of the Fabric OS Administrator Guide and the Fabric OS Command Reference Guide.Ethernet connectionSMI-S compliant management program

You can connect a management station to one switch with Ethernet while managing other switches connected to the first switch with FC. To do so, set the FC gateway address of each of the other switches to be managed to the FC IP address of the first switch.

The gateway address of the first switch should be set to whatever the gateway address is for the subnet on which the first switch resides. See Connecting with a management station.

Connecting with a management station
Connection typeManagement stationFirst switchSecond switchThird switch
Ethernet192.168.1.09192.168.1.10 204.1.1.11204.1.1.12
FCIP192.168.65.09192.168.65.10192.168.65.11192.168.65.12
Gateway 192.168.1.10any, not self192.168.1.10 192.168.1.10