The interconnect in bay X was not allowed to power on due to insufficient power

Symptom

The interconnect in bay X was not allowed to power on due to insufficient power in the enclosure.

ID: hpris.emRegistry.<version>.InterconnectInsufficientPower

Severity: Critical

Cause

The frame does not have the necessary power supplies installed to operate at the current power mode.

Action
  1. Do one of the following:
    1. Install additional power supplies. For more information, see the frame setup and installation guide on the Hewlett Packard Enterprise website.
    2. Consider changing the input power mode for the logical enclosure to "Redundant power supply."