Removing and replacing the system battery

Prerequisites
Before you perform this procedure make sure you have a small flat-bladed, nonconductive tool available.
Procedure
  1. Remove the front bezel.
  2. Power down the server.
  3. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  4. Disconnect all peripheral cables from the server.
  5. Do one of the following:
  6. Remove the access panel.
  7. Remove the air baffle.
  8. Locate the battery on the system board.
  9. Use a small flat-bladed, nonconductive tool to carefully lift the front of the battery from the socket.
  10. Remove the battery.

    Removing the system battery
  11. To replace the component, reverse the removal procedure.
  12. Properly dispose of the old battery.
    For more information about battery replacement or proper disposal, contact an authorized reseller or an authorized service provider.