Removing and replacing the cable management arm

CAUTION: Support the CMA during the removal/replacement procedure. Do not allow the CMA to hang by its own weight during the procedure.
Procedure
  1. Slide the server tray out of the rack:
    1. Loosen the server tray thumbscrews.
    2. Grasp the tray notch to slide the server out of the rack.

    Sliding the server tray out of the rack
  2. Open the cable clamps and remove the cables routed through the CMA.


    Opening the cable clamps and removing the cables

  3. Remove the CMA from the rack:
    1. Press the latch on the outer rail of the right CMA and slide out the CMA arm.
    2. Press the blue latch on the left inner and outer rails of the CMA , and then slide out the CMA.

    Removing the CMA from the rack

To replace the component, reverse the removal procedure.