HPE OneView Appliance Health alerts Warning: The Solid State Drive (SSD) wear reached the warning threshold for the appliance Critical: The Solid State Drive (SSD) wear reached the critical threshold for the appliance The SSD wear on the appliance is in the ok range The disk usage on the appliance {enclosure name and bay number} exceeded the warning usage threshold The disk usage on the appliance {enclosure name and bay number} exceeded the critical usage threshold The disk usage on the appliance is in the ok range The swap usage on the appliance {enclosure name and bay location as hyperlink} exceeded the warning usage threshold of 85% The swap usage on the appliance {enclosure name and bay location as hyperlink} exceeded the warning usage threshold of 90% The swap usage on the appliance is in the ok range The physical memory usage on the appliance exceeded the warning usage threshold of 85% The physical memory usage on the appliance exceeded the warning usage threshold of 90% The physical memory usage on the appliance is in the ok range The disk usage on the appliance exceeded the warning usage threshold The disk usage on the appliance exceeded the critical usage threshold The disk usage on the appliance exceeded the usage threshold The disk usage on the appliance exceeded the usage threshold The CPU usage on the appliance {enclosure name and bay number} exceeded the warning usage threshold The CPU usage on the appliance {enclosure name and bay number} exceeded the critical usage threshold The CPU usage on the appliance is in the ok range The appliance encountered an internal communication problem with management processor The appliance cluster is no longer highly available The appliance is now clustered for high availability The appliance could not be clustered The appliance is forming an appliance cluster Changes made on {active enclosure name and bay number} are being synchronized All changes made have been synchronized This appliance, {enclosure name and bay number}, has not discovered the frame that contains it {Enclosure name and bay number} is no longer available {Enclosure name and bay number} cannot join the appliance cluster {Enclosure name and bay number} cannot join the appliance cluster {Enclosure name and bay number} cannot join the appliance cluster {Enclosure name and bay number} cannot join the appliance cluster {Enclosure name and bay number} is not configured for high availability: no standby appliance was found {Enclosure name and bay number} cannot join the appliance cluster because it is not ready The appliance cluster is no longer highly available because {enclosure name and bay number} was physically removed The appliance cluster is no longer highly available The appliance cluster is no longer highly available The appliance cluster is no longer highly available {Frame name} has appliances in both appliance bays This appliance, {enclosure name and bay number}, cannot communicate with its frame This appliance, {enclosure name and bay number}, cannot communicate with its frame {Enclosure name and bay number} cannot join the appliance cluster IPv4 Gateway is not reachable File system errors were detected during appliance startup Proxy server {address} cannot be resolved to an IP address Network settings are configured for recovery remote access An error occurred during network interface configuration of the appliance An error occurred during network interface configuration of the appliance An error occurred during network interface configuration of the appliance An unexpected interruption happened during setting of appliance network configuration Failed to discover hardware {DNS server IP address} is not responding as a DNS server The specified IP addresses: {appliance IP address} and {gateway IP address} are not in the same subnet {subnet mask} DHCP Server failed to provide a valid {IPv4 or IPv6} Address for MAC Address {Appliance IP address} address does not resolve to {appliance hostname} {Appliance hostname} address does not resolve to {appliance IP address} Unable to communicate with NTP server Unable to resolve the IP address for NTP server Unable to synchronize with NTP server The appliance could not sync with the NTP server Appliance will not be able to participate in the compliance report generation due to an internal error Unable to delete proxy server configuration Proxy server certificate not found Email server certificate not found The backup was not taken and saved at the scheduled time The backup has not been taken and downloaded Alert email notification filtering may be degraded Alert email notification filtering may be degraded One or more appliance resources are below the minimum required values The iLO user password for the appliance has been reset The appliance in X has an existing iLO user account The iLO settings for X, appliance bay Y, were reset The number of user sessions on the appliance has reached the warning threshold The number of user sessions on the appliance has reached the configured limit The appliance encryption key is stored on the appliance hard drive More licenses required CA certificate is expired RabbitMQ server certificate is expired WebServer certificate with alias name localhostSelfSignedCertificate is expired Leaf certificate is about to expire The AMQP server certificate is about to expire The certificate basic constraint path length is invalid <CA/leaf> certificate is not yet valid <CA/leaf> certificate is not trusted <CA/leaf> certificate is revoked The certificate is not compliant for FIPS mode CA certificate is using an insecure digital signature hash algorithm CRL issued by HP TestHead is expired CRL issued by HP TestHead is about to expire The CRL is not found for the CA certificate Unable to download the CRL for the certificate CRL is not signed by the CA The certificates will not be able to participate in the compliance report generation {Alias} has been trusted previously The appliance web server certificate has either expired or reverted to an older certificate The appliance web server certificate is either expired or reverted to an older certificate Certificate could not be added to kiosk trust store An unexpected problem occurred during update of the certificates Unable to add CA certificates to CA trust stores Certificates using the SHA-1 digital signature are insecure and deprecated Number of managed enclosures exceeds supported limit