Server profile errors Unable to {profile task name} {resource name} The requested profile operation failed One or more tasks from the requested profile operation has failed with the following error The enclosure group associated with this server profile was changed The server profile is inconsistent with its server profile template The server profile is inconsistent with its server profile template The server profile is inconsistent with its server profile template The server profile is inconsistent with its server profile template The server profile is inconsistent with its server profile template The server profile is inconsistent with its server profile template Network Y assigned to this connection was deleted Network set Y assigned to this connection was deleted Network Y assigned to this connection was deleted An error has occurred on connection X Interconnect X port Y subport Z is unlinked A pause frame flood condition caused the port to be unlinked A loop condition caused interconnect X port Y subport Z to become unlinked A loop condition caused interconnect X port Y subport Z to become unlinked Interconnect X port Y subport Z is unlinked Interconnect X is powered off Network X is not available on interconnect Y Interconnect X port Y subport Z is unlinked For uplink set X, the networks Y do not have corresponding VLAN IDs defined Uplink-set X carrying network Y is unlinked An error has occurred on connection X An error has occurred on connection X There is no interconnect in X bay Y Connection enforcement failed An error has occurred on connection X Interconnect Y port Z subport A is unlinked A packet storm has been detected Release device bay failures Reserve device bay failures Server hardware Device bay X, bay Y is not available Bootable volume X has become shareable for profile Bootable volume X has become critical for profile LUN value changed for bootable volume Boot WWPN of connection X is not valid Boot TARGET of connection X is not valid Volume attachment action failed Volume action failed The server hardware for server profile X is not powered off Volume X is inconsistent with its volume template Create of volume X failed The following volumes were upgraded Unable to upgrade the following volumes Problems were encountered deleting attachments Server access to SAN storage volumes may be limited Server hardware has been inserted into the enclosure bay There is no server hardware in X The server hardware X is being managed by another management system The state of the server hardware in X is 'Unmanaged' Server profile settings may not reflect the actual server hardware configuration The server hardware associated with this server profile has been moved The server hardware associated with this server profile has been moved The server hardware associated with this server profile has been moved The serial number of the server hardware matches but the server hardware type is different The serial number of the server hardware does not match The server hardware type in X does not match the server hardware type Server profile settings conflict with the server hardware configuration Server profile settings differ from the configuration of the server hardware Unable to unassign the server profile Assigning server hardware failed Unable to undeploy profile Unable to deploy profile Unable to deploy profile The state of server hardware X is not "Profile Applied" as expected This profile was created via migration from Virtual Connect to OneView This profile was created via migration from Virtual Connect to OneView The profile could not be automatically reapplied Server profile settings conflict with the server hardware configuration BIOS settings do not match the expected values The firmware and drivers on X are inconsistent with the firmware baseline A firmware baseline bundle has been removed from the appliance The local storage configuration on the server hardware does not match the local storage configuration from the server profile Failed to apply the local storage configuration Unable to communicate with the following SAS controllers The following SAS controllers have arrays with multiple logical drives on the server The following tracked logical drives were not found in the server hardware inventory The following SAS controllers have logical drives using either unsupported raid level or unsupported drive technology The health of one or more logical JBODs has degraded One or more logical JBODs have been deleted Inconsistent attributes detected for one or more logical JBODs A status update has been received for one or more logical JBODs, which are not defined in this profile Unable to apply the local storage settings SAS controller issues Unexpected problem has occurred Unable to import the local storage configuration The drive write cache setting is incompatible Network X, used by connections Y has been deleted Requested bandwidth exceeds the maximum bandwidth configured The firmware baseline has been removed The storage pool has been removed The following volume attachments are inconsistent with their volume template The following volumes were upgraded Unable to upgrade the following volumes to match the new template version Server access to SAN storage volumes may be limited LUN type is not valid for server profile templates No enclosure groups are compatible OS deployment plan is updated When a deployment plan is removed, edit the server profile to change the deployment plan Image Streamer volume errors An update of OS deployment plan has caused an inconsistency The deployment plan has been deleted