Enclosure management errors An unexpected problem was encountered An unexpected problem was encountered creating an Image Streamer storage cluster An unexpected problem was encountered creating a logical interconnect Failed to delete logical enclosure An unexpected problem was encountered while processing a change in device bay X The blade from enclosure X bay Y has moved The firmware is below the minimum supported version There was an unexpected problem processing an update to the enclosure group The enclosure is currently migrating from Virtual Connect The enclosure completed migration from Virtual Connect Removing the enclosure failed The enclosure is being managed by another management system The enclosure is being monitored by another management system List of unexpected subcomponent add error messages OneView is unable to communicate with the enclosure's link modules An unexpected problem was encountered An unexpected problem was encountered The health status of fan X has been set to {status} The logical enclosure is inconsistent with its enclosure group OneView no longer has management access to the enclosure Insufficient IP addresses in the IPv4 address pool to allocate an IP for each device and interconnect The actual IPv4 address X for {device} does not match the expected configuration The actual IPv4 address type X for {device} does not match the expected configuration The actual IPv4 address X for {device} does not match the expected configuration The actual IPv4 address type does not match the expected configuration The actual IPv6 address does not match the expected configuration The actual IPv6 address type does not match the expected configuration The actual IPv6 address does not match the expected configuration The actual IPv6 address type does not match the expected configuration X is not configured to use DHCPv4 as specified X is not configured for external management of its IPv4 address as specified X is not configured with the IPv4 address allocated to it by the logical enclosure The iLO is not configured to use DHCPv4 The iLO is not configured for external management of its IPv4 address The iLO is not configured with the IPv4 address allocated to it The power mode for enclosure does not match There was an unexpected problem processing an update to the logical enclosure An unexpected problem was encountered The firmware versions of the primary and standby Onboard Administrators do not match OneView is unable to communicate with the enclosure's link modules A connection to the monitored enclosure could not be made Fan configuration is not sufficient for proper device cooling A connection to the enclosure could not be made Unable to refresh the enclosure An unexpected problem was encountered The health status of power supply has been set The ambient temperature mode of server hardware is not consistent The ambient temperature mode for enclosure does not match The health status of Crossbar Fabric Module (XFM) has been set Partition has been modified Partition has been created Partition has been deleted Partition is booting to EFI Partition firmware is booting up The operating system is up Partition is powering off X is not configured to use DHCPv6 as specified X is not configured for external management of its IPv6 address X is not configured with the IPv6 address allocated to it by the logical enclosure The iLO is not configured to use DHCPv6 The iLO is not configured for external management of the IPv6 address The iLO is not configured with the IPv6 address allocated to it Enclosures will not be able to participate in the compliance report generation Enclosure add operation failed Enclosure add operation failed Unable to establish trusted communication with the Onboard Administrator Unable to establish trusted communication with the Onboard Administrator Unable to configure trusted communication with the standby Onboard Administrator Asynchronous notifications from the frame link module are not being received Number of managed enclosures exceeds supported limit