2400 series 2400-[Device Type] [Slot number] SAN Error - SAN link is down 2401-[Device Type] [Slot number] SAN Error - Fabric Login (FLOGI) failed 2402-[Device Type] [Slot number] SAN Error - Name Server login failed 2403-[Device Type] [Slot number] SAN Error - No targets found 2404-[Device Type] [Slot number] SAN Error - Adapter restart failed 2405-[Device Type] [Slot number] Error - Vital Product Data (VPD) is not available 2406-[Device Type] [Slot number] NIC Error - NIC personality (Ethernet, iSCSI, or FCoE) could not be changed 2407-[Device Type] [Slot number] Error - The firmware update did not complete successfully 2408-[Device type] [Slot number] Error – Firmware image recovery not successful 2409-[Device type] [Slot number] Error – Failure to apply Virtual Connect (VC) settings 2410-[Device type] [Slot number] Error – Controller I/O timeout failure 2411-[Device Type] [Device number] iSCSI Error - Failed to acquire DHCP initiator network address 2412-[Device Type] [Device number] iSCSI Error - Failed to acquire DHCP target network address 2413-[Device Type] [Device number] iSCSI Error - Failed to acquire DHCP iSNS Server IP address 2414-[Device Type] [Device number] iSCSI Error - iSCSI login failed 2415-[Device Type] [Device number] iSCSI Error - Boot LUN not available 2416-[Device Type] [Device number] Error - Controller firmware not ready 2419-[Device Type] [Slot number] Error - Rx/Tx is disabled on this device 2420-[Device Type] [Slot number] Error - The UEFI driver for the device detected an older version of the NVM image than expected 2421-[Device Type] [Slot number] Error - The UEFI driver for the device detected a newer version of the NVM image than expected 2422-[Device Type] [Slot number] Error - The UEFI driver for the device stopped because the NVM image is newer than expected 2423-[Device Type] [Slot number] Error - Firmware recovery mode detected