Firmware errors This firmware bundle does not meet minimum requirements and will not be made available for use Critical: Unable to upload the firmware bundle file X Critical: The server hardware does not meet the minimum firmware requirement Unable to update the iLO to the minimum supported version Unable to read and save firmware installation status information from the server hardware The port map, virtual identifier, or server location information may not be up-to-date in the iLO The firmware update operation was unable to update The firmware components were not installed The server iLO firmware version X must be updated to version Y to be managed Firmware update inventory report The firmware versions of the primary and standby Onboard Administrators do not match The firmware is below the minimum supported version The firmware baseline X has been removed The component cannot be uploaded to OneView Appliance restore has been performed The file you are attempting to upload is a duplicate of the firmware bundle X The firmware bundle is not accessible The firmware bundle is not accessible The firmware bundle is not accessible Unable to validate the signature for the X component Unable to validate the signature for the X component contained with the firmware baseline Y Unable to validate the signature for the component contained with the firmware baseline Y Unable to validate the signature for the component Unable to assign scopes to the firmware bundle {RM name} will not be able to participate in the compliance report generation Signature file for the hotfix X has not been uploaded to firmware repository Unable to update the iLO firmware. Unable to update the frame link module firmware Unable to update the OA firmware Unable to update the iLO firmware This firmware bundle does not contain the following infrastructure and manageability components Selected SPP bundle does not contain the required iLO firmware version The firmware of following servers cannot be updated The specified firmware baseline is not supported External web repository cannot be managed in the FIPS/CNSA modes Critical: An invalid signature file detected A new firmware baseline has been applied on this server The firmware has been installed, but a reboot is required for activation Unable to communicate with the external repository The specified username and/or password is not valid for the web server The repository X does not have read permission Maximum size for repository X has not been configured on the web server Maximum size for repository X has not been configured correctly on the web server External web repository X cannot be managed in the FIPS/CNSA modes The repository X does not have valid certificate or the certificate is not imported Unable to access files on the external repository The firmware installation for the server X has been rescheduled to Y The firmware and drivers do not match the firmware baseline The firmware and drivers do not match the firmware baseline The firmware and drivers do not match the firmware baseline The firmware and drivers do not match the firmware baseline The "Firmware Only" option is not supported when the high security mode has been enabled Unable to clear the secure boot mode settings A new firmware baseline has been applied A new firmware baseline has been applied on the server The firmware baseline bundle X set in this profile is unavailable A new firmware baseline has been applied on the server A new firmware baseline has been applied A new firmware baseline has been applied A new firmware baseline has been applied A new firmware baseline has been applied A new firmware baseline has been applied Staging failed for one or more components Firmware installation of one or more components failed Verification procedure detected that some component versions are not matching Firmware installation failed for the following components An internal error occurred when performing NAND-based firmware update Unable to perform NAND-based firmware update An internal error occurred when performing a NAND-based firmware update An internal error occurred when performing a NAND-based firmware update An internal error occurred when performing a NAND-based firmware update An internal error occurred when performing a NAND-based firmware update Unable to install components Unable to install firmware components Unable to install components Unable to install firmware components Unable to collect the firmware inventory OneView did not get a response The firmware update operation was unable to update The firmware update operation failed The firmware update operation was unable to activate one or more components Unable to update the following components The firmware staging operation has failed for the server Firmware update on the server has been canceled Unable to update firmware on the server Unable to update firmware on the server Unable to update firmware on the server Unable to initiate a firmware update Encountered an unexpected problem Firmware update on the server has been canceled The enclosure X firmware is below the minimum supported version The enclosure X firmware does not match the firmware baseline version The installed firmware version of X enclosures is below the minimum supported version Logical enclosure firmware update failed for X enclosures The firmware is below the minimum supported version Unable to clear the staging directory Unable to mount the specified baseline because the provided baseline URI link is invalid Insufficient available disk space to copy the files Unable to mount baseline through iLO Virtual Media Unable to mount baseline through iLO Virtual Media because iLO Virtual Media is busy Unable to mount baseline through iLO Virtual Media because HPE iLO Advanced license is not available The baseline provided is not supported or the concurrent download limit of baseline has been reached Unable to execute HP SUM Baseline inventory operation could not be completed Deployment operation could not be completed Baseline inventory operation could not be completed HP SUM binary could not be executed Version of HP Smart Update Manager in the baseline is lower than 7.4.0 Staging directory validation failed Unable to create staging directory Unable to reboot the server Operation request was changed unexpectedly while processing another request Unable to copy the files from specified baseline during staging Unable to stage the components from the specified baseline Unable to deploy the components from the specified baseline HP Smart Update Tools does not understand the baseline request from HP OneView Unable to download, extract, or mount baseline The firmware and drivers on X do not match the firmware baseline The firmware and drivers on X are inconsistent with the firmware baseline The firmware and drivers on X are inconsistent with the firmware baseline, but are in the process of being updated The firmware and drivers on X are inconsistent with the firmware baseline and a user action may be necessary to proceed with the update Unable to perform a firmware update on the server The firmware baseline applied on the server hardware is inconsistent SUT encountered failure during staging Signature verification has failed for SUM in the mounted SPP Signature verification has failed for one or more of the smart components Smart Update Manager in the SPP cannot perform deployment A minimum version of 8.1.0 of Smart Update Manager is required The following firmware components are inconsistent The selected firmware baseline cannot be used for applying firmware Unable to apply the profile using the specified option Unable to fetch the firmware installation status Signature files for the hotfix have not been uploaded