Interconnect module errors The logical interconnect is in degraded state The stacking health has changed to disconnected The following interconnects are in critical state The following interconnects are absent The following interconnects do not match expected interconnect type The logical interconnect is inconsistent with the logical interconnect group The logical interconnect is consistent with the logical interconnect group The interconnect is unmanaged The interconnect is unsuppported The interconnect module is either absent or the wrong type Renamed due to an enclosure name change Renamed due to a logical enclosure name change Logical interconnect cannot contain Virtual Connect and Cisco The interconnect is not supported by the enclosure Logical interconnect connectivity limited by unsupported enclosure The firmware does not support LLDP tagging The firmware does not support LLDP enhanced TLV The logical interconnect is connected to more than one logical switch {Task} started for logical interconnect Y Update success for logical interconnect Activate success for logical interconnect Stage success for logical interconnect Firmware update failed for logical interconnect Firmware activate failed for logical interconnect Firmware staging failed for logical interconnect Firmware update request rejected for X The logical interconnect cannot complete the firmware operation The following interconnects require a firmware update The following interconnects require a firmware update {SPP name} is staged but not activated The logical interconnect is inconsistent The type of one or more interconnects which are part of logical interconnect cannot be managed The type of one or more interconnects which are part of logical interconnect is not compatible The interconnect link topology is not compatible The interconnect link topology is not compatible The specified downlink speed will cause mismatched downlink speeds All uplink ports are operational For uplink set X, uplink ports {Y} are nonoperational Uplink ports are non-operational Uplink set X has no networks For uplink set X, uplink ports {Y} are nonoperational Uplink ports are non-operational Uplink ports are non-operational The uplink ports of uplink set X are not connected to the same SAN fabric For uplink set X, uplink ports Y are non operational For uplink set X, uplink ports Y are non operational One or more ports in uplink set X do not have trusted neighbor Networks are not bound to a VSAN Networks are not bound to a VSAN Networks are bound to a VSAN on multiple switches FCoE Admin is not configured The uplink set specifies multiple FCoE networks Networks do not have corresponding VLAN IDs The uplink set X only has ports on interconnect Y The uplink set X has both Ethernet and FCoE networks On interconnect X, the ports {Y} are not active for uplink set Z Speed configuration for port conflicts with plugged-in transceiver The uplink set does not have the corresponding FEX ID The uplink set X does not have the corresponding vPC ID The uplink set does not have the corresponding port-channel ID The uplink set connects to more than one Nexus switch Uplink set logical switch connections not linked to logical interface Uplink set X has trunking enabled and only one uplink port configured Trunking is enabled for uplink set X but no trunks have formed For uplink set X, ports {Y} are master trunk ports For uplink set X, ports {Y} are not included in the trunk that formed with the upstream switch For uplink set X, ports {Y} are nonoperational For uplink set X, ports {Y} are nonoperational For uplink set X, ports {Y} are nonoperational Interconnect response timeout: The interconnect could not be brought under management The interconnect module is absent. An {interconnect URI} is expected The interconnect module does not match the expected interconnect type X The interconnect firmware is incompatible on interconnect X The interconnect module is not a member of the logical interconnect The interconnect module could not be configured The interconnect module could not be imported The interconnect is unsupported Root access enabled Renamed due to enclosure name change Link status changed Administrative state changed Port type changed Duplex mode changed FC port state changed Flex NIC subport state changed Mapping status changed Neighbor status changed VSAN status changed VLAN status changed FEX configuration status changed FCoE status changed The interconnect is not operating as a Virtual Connect device The interconnect is operating as a Virtual Connect device FIPS is currently enabled on interconnect X Interconnect port L{X} connected to L{Y} of {interconnect name, URI} does not have supported cable Invalid interconnect link topology cabling Invalid combination of interconnect modules The interconnect port L{X} is incorrectly connected to identified interconnect Invalid interconnect link topology cabling Interconnect port L{X} is not cabled Invalid interconnect link topology cabling Invalid interconnect link topology Interconnect port L{X} is incorrectly connected to {interconnect name}, port L{Y} Invalid interconnect link cabling Interconnect port L{X} is incorrectly connected Invalid interconnect link topology cabling Interconnect port L{X} is incorrectly connected to {interconnect name, URI}, port L{Y} Invalid interconnect link topology cabling Interconnect port L{X} is either disconnected or connected to an outside management ring Interconnect X has been Y Downlink ports are up due Downlink ports are down due to invalid cabling of interconnect port L{X} Downlink ports are down due to absence of cable in interconnect port L{X} Invalid interconnect link topology Invalid interconnect link topology Invalid interconnect link topology Invalid interconnect link topology Invalid interconnect link topology Invalid interconnect link topology Invalid combination of interconnect modules Interconnect port L{X} is incorrectly connected to {interconnect name, URI}, port L{Y} Invalid interconnect link topology cabling Interconnect port L{X} is either disconnected or connected to an outside management ring Interconnect port L{X} is not cabled Invalid interconnect link topology cabling Invalid interconnect link topology cabling Interconnect is invalid and makes port L{X} critical Invalid interconnect link topology Interconnect port L{X} has failed to read cable Invalid interconnect link topology cabling The connected port L{X} is on an interconnect {interconnect name, URI} that is powered off Invalid interconnect link topology Interconnects are not present in same bay set Invalid interconnect link topology Firmware staging failed for the interconnect Firmware activation failed for the interconnect X Activation started for interconnect Unable to activate firmware on interconnect X with firmware baseline Y Activation failed for the interconnect X with firmware baseline Y due to Z Staging started for interconnect Staging failed for the interconnect X with firmware baseline Y due to Z Firmware stage operation ignored for the interconnect {X} because the interconnect is already running the desired firmware version Firmware activation ignored for the interconnect {X} because the interconnect is already running the desired firmware version Task resource creation failed Firmware update not allowed because of invalid interconnect state The firmware version installed on interconnect does not match the firmware baseline specified The interconnect firmware version {X} does not match the baseline version {Y} specified in the firmware baseline The interconnect requires a firmware update because the installed firmware version {X} is unsupported Firmware activation failed for the interconnect {X} Unable to stage firmware on interconnect X Management from remote enclosures is not supported The port is inserted with an unsupported transceiver The profile does not have redundant connections The network connection is not active Connection on downlink port X, subport Y has {connection status} Network assigned to this connection was deleted Network assigned to this connection is no longer accessible Network set assigned to this connection was deleted The subport is unlinked A pause frame flood condition caused the port to be unlinked A loop condition caused the subport to become unlinked The subport is unlinked The uplink port is unlinked Connection enforcement failed Interconnect is powered off The interconnect module is absent The interconnect module is not part of any logical interconnect The uplink ports are not FCOE-active Network assigned to this connection was removed from the internal networks The subport is unlinked At least one network was removed from the internal networks Connection on downlink port X has {connection status} Connection deployed on downlink port Connection deployed on downlink port The connection on downlink port is degraded An error has occurred in a connection on X The interconnect module is monitored Connection enforcement succeeded The connection on downlink port has failed Interconnect subport is not available The network VLAN ID does not match the VLAN ID of the associated SAN Unable to communicate Unable to communicate Switch to interconnect connection is disabled for switch The IP address or host name is for incorrect switch Switch with matching serial number and module ID already exists The IP address or host name does not refer to the correct switch The IP address or host name does not refer to the correct switch Failed to parse the XML from switch Link status on port changed Switches in the logical switch are not correctly configured Logical switch has only one switch One of the switches is absent from the logical switch The vPC is operational on the switches in the logical switch The stacking health has changed to redundantly connected The logical switch is consistent with the logical switch group The logical switch is inconsistent with the logical switch group The logical switch contains a switch that is unmanaged The logical switch contains a switch that is unmanaged The logical switch contains a switch model that is not supported The stacking health changed to disconnected The internal link set is inconsistent The internal link set is consistent Networks are mapped to mezzanine Y, port Z in profile X The network set X used by profile(s) Y has networks which exceed {max network limit} allowed The URI X is not a valid managed SAN URI The URI is not a valid managed SAN URI The managed SAN specified for FC network X is not available The managed SAN specified for FC network {X} is not available The self-test failed for the Virtual Connect SE 40Gb F8 Module Host Key verification failed Staging failed for the interconnect X with firmware baseline A pause flood condition has been detected on the uplink port The configuration for port X does not match The configuration for port X does not match A packet storm has been detected on uplink set X Network type should be updated Desired speed should be updated Desired FEC mode should be updated Network Y should be updated as native network Network Y should be updated as non-native network Isolated network should be removed from private vlan domain X network(s) will be added to internal network X network(s) should be added to internal network X network(s) will be removed from internal network X network(s) should be removed from internal network Uplink set(s) X should be added Uplink set(s) X should be removed Uplink set(s) X should be added to uplink set Uplink port(s) X should be removed from uplink set sFlow configuration should be removed Network(s) X should be added to uplink set Network(s) X should be removed from uplink set Private VLAN domain(s) with primary network(s) X should be added Private VLAN domain(s) with primary network(s) X should be removed Isolated network X should be added from private vlan domain The port is unlinked For uplink set X, uplink ports Y are nonoperational The advanced networking configuration script contents will be modified The advanced networking configuration script will be reordered The advanced networking configuration scripts will be added The advanced networking configuration scripts will be removed IGMP proxy reporting will be enabled IGMP proxy reporting will be disabled IGMP multicast flood prevention will be enabled IGMP multicast flood prevention will be disabled IGMP snooping will be disabled IGMP snooping will be enabled IGMP snooping will be enabled for all VLAN tagged networks IGMP snooping VLANs will be modified The IGMP snooping idle timeout interval value will be changed Storm control will be enabled Storm control will be disabled The storm control threshold value will be changed The storm control polling interval will be changed Switch credentials failed to authenticate The SSH key on the switch does not match the stored key Switch SSH key does not match the stored key SSH key successfully authenticated with switch X Certificate successfully authenticated with switch Certificate failure accessing switch Port-channel contains more ports than configured by OneView The network set is associated with server profile connections The uplink set does not contain any uplink ports The uplink set does not contain any uplink ports The connection LAG ID pool is exhausted Unable to power off interconnect Support dump cannot be generated The support dump cannot be generated Creating the support dump failed LAG status changed from active to stand-by Activation failed on subordinate while loading firmware version Activation failed on subordinate while loading firmware version Activation failed on subordinate in post activation stage Uplink ports are degraded Downlink ports are degraded