The configuration for port X does not match

Symptom

The configuration for port X does not match the plugged in transceiver or cable.

This alert was updated in HPE OneView 4.2.

ID: swmon.moduleIncompatible

Severity: Warning

Health Category: Interconnect

Resource URI: /rest/interconnects

Action
  1. Reconfigure port X to match the plugged in transceiver or cable.
  2. Alternatively, do one of the following:

    • If the port is being configured in an Ethernet uplink set, replace the plugged in 10Gb transceiver or cable with a 40Gb capable transceiver or cable.

    • If the port is being configured in an FC uplink set, replace with an FC capable transceiver or cable.