For uplink set X, uplink ports {Y} are nonoperational

Symptom

For uplink set X, uplink ports {Y} are nonoperational.

ID: crm.uplinkSetStateChange

Severity: Warning

Health Category: logical-Interconnect

Resource URI: /rest/uplink-sets

Cause
  • Uplink ports might be disabled or unlinked.
  • LAG configuration or status on the upstream switch ports is missing or incorrect.
  • Uplink port DCBX status and FCoE configuration information are missing or incorrect.
Action
  1. Verify that the uplink ports used by the uplink set are enabled and linked.
  2. Verify that both the LAG configuration and status on the upstream switch ports are correct.
  3. If the uplink set contains FCoE networks, verify the uplink port DCBX status and FCoE configuration on the upstream switch ports.

    For more information, see the HPE OneView User Guide for HPE Synergy or HPE OneView Help for HPE Synergy on the Hewlett Packard Enterprise website (https://www.hpe.com/info/synergy-docs).