2407-[Device Type] [Slot number] Error - The firmware update did not complete successfully

Symptom

2407-[Device Type] [Slot number] Error - The firmware update did not complete successfully.

Cause

The firmware update failed.

Action

Verify that the proper firmware image is selected, and attempt to update the firmware again.
For more information, see the following topic in the troubleshooting guide for your product on the Hewlett Packard Enterprise website:
- HPE ProLiant Gen10—"Keeping the system current" (https://www.hpe.com/info/gen10-troubleshooting)
- HPE Synergy—"Updating the firmware" (https://www.hpe.com/info/synergy-troubleshooting)
If the issue persists, open a support case using the Hewlett Packard Enterprise Support Center website (https://www.hpe.com/support/hpesc).