The THRESHOLD value is invalid
Symptom
The THRESHOLD
value is invalid.
Cause
The value of the PWRALERT_SETTINGS THRESHOLD
parameter is invalid.
Action
Enter a valid PWRALERT_SETTINGS
threshold:
THRESHOLD
—Sets the alert threshold, in watts.DURATION
—Sets the length of the sample time, in minutes.This value can be any number between 1 to 240, but it will be rounded off to the nearest five-minute value.
For more information, see the RIBCL command description in the HPE iLO 4 Scripting and Command Line Guide on the Hewlett Packard Enterprise website.