3020-PCIe Slot X failed to train at Gen Y speed and Z width

Symptom

3020-PCIe Slot X failed to train at Gen Y speed and Z width.

Cause
  • The device is not properly seated.

  • The device is not running the latest firmware.

Action
  1. Remove and then reinstall the card.
    For more information, see the server maintenance and service guide for your product on the Hewlett Packard Enterprise website:
  2. Update the card firmware.
    For more information, see the following topic in the troubleshooting guide for your product on the Hewlett Packard Enterprise website:
  3. If the issue persists, open a support case using the Hewlett Packard Enterprise Support Center website (https://www.hpe.com/support/hpesc).