315B-HPE Persistent Memory Configuration Error
315B-HPE Persistent Memory Configuration Error - HPE Persistent Memory Processor X, DIMM Y was configured in interleaving mode. This DIMM has been disabled because it has been populated in incorrect slot which makes interleaving not possible. This DIMM was populated on Processor A, DIMM B when the interleaving configuration was successfully applied.
DIMMs from an interleaved set are installed incorrectly.
CAUTION:
Failure to properly handle DIMMs and
HPE Persistent Memory modules can damage the memory components and the system board connector. For more information, see the handling guidelines in the troubleshooting guide for your product:
- HPE ProLiant Gen10 (https://www.hpe.com/info/proliantgen10-docs)
- HPE Synergy (https://www.hpe.com/info/synergy-docs)
To complete the interleaved set, move the DIMM back to the correct location on Processor A as per the last successful configuration.
For more information, see the
server maintenance and service guide for your product on the
Hewlett Packard Enterprise website:
- HPE ProLiant Gen10 (https://www.hpe.com/info/proliantgen10-docs)
- HPE Synergy (https://www.hpe.com/info/synergy-docs)