SNMP_ACCESS is disabled, SNMP_PORT and SNMP_TRAP_PORT will not be changed
Symptom
SNMP_ACCESS
is disabled, SNMP_PORT
and SNMP_TRAP_PORT
will not be changed.
Cause
An attempt to change the SNMP_PORT
and SNMP_TRAP_PORT
values was made while SNMP_ACCESS_ENABLED
was set to "no."
Action
To make changes to the configuration, set the value of the SNMP_ACCESS_ENABLED
parameter to "yes."
For more information, see the RIBCL command description in the HPE iLO 4 Scripting and Command Line Guide on the Hewlett Packard Enterprise website.