UEFI System Utilities and Shell Command Mobile Help for HPE ProLiant Thin Micro Servers
  • Getting started
    • Introduction
      • What is UEFI?
    • UEFI System Utilities overview
      • Launching the System Utilities
      • Navigating the System Utilities
      • When a reboot is required
      • System Utilities menu overview
      • Common setup and configuration FAQs
      • Updating firmware or system ROM
  • System Utilities main menu options
    • System Configuration
      • System Configuration menu options
      • BIOS/Platform Configuration (RBSU)
      • Using the iLO 4 Configuration Utility
      • Embedded device information
    • One-Time Boot Menu
      • One-Time Boot Menu options
      • Selecting an option for a one-time boot
    • Embedded Applications
      • Embedded UEFI Shell
      • Launching the Embedded UEFI Shell
      • Integrated Management Log (IML)
      • Viewing or clearing the IML
      • Firmware Update
      • Embedded Diagnostics
      • Launching Embedded Diagnostics
    • System Information and System Health
      • System Information
      • Viewing System Information
      • System Health
      • Viewing System Health
    • Rebooting the system and selecting a language
      • Rebooting the system
      • Selecting a language
  • BIOS/Platform Configuration options
    • Configuring System Options
      • System Options
      • Serial Port Options
      • USB Options
      • Processor Options
      • Virtualization Options
      • Boot Time Optimizations
      • Memory Operations
    • Configuring Boot Options
      • Boot Options
      • Setting the boot order policy
      • UEFI Boot Order
      • Changing the UEFI boot order
      • Advanced UEFI Boot Maintenance
    • Configuring Network Options
      • Network Options
      • Network Boot Options
      • Pre-Boot Network Settings
      • Configuring Pre-Boot Network Settings
      • iSCSI Boot Configuration
      • VLAN Configuration
      • Configuring VLAN Configuration
    • Configuring Storage Options
      • Storage Options
      • Fibre Channel/FCoE Scan Policy
      • Changing the default Fibre Channel/FCoE scanning policy
      • Embedded Storage Boot Policy
      • Setting the embedded storage boot policy
      • PCIe Storage Boot Policy
      • Setting the PCIe storage boot policy
    • Configuring the Embedded UEFI Shell
      • Embedded UEFI Shell options
      • Embedded UEFI Shell
      • Enabling or disabling the Embedded UEFI Shell
      • Add Embedded UEFI Shell to Boot Order
      • Adding the Embedded UEFI Shell to the UEFI Boot Order list
      • UEFI Shell Script Auto-Start
      • Enabling or disabling automatic execution of the Embedded UEFI Shell startup script
      • Shell Auto-Start Script Location
      • Setting the Embedded UEFI Shell startup script location
      • Network Location for Shell Auto-Start Script
      • Setting the network location for the Shell auto-start script
    • Configuring Power Management
      • Power Management options
      • Power Profile
      • Setting a power profile
      • Power Regulator
      • Setting the Power Regulator mode
      • Minimum Processor Idle Power Core C-State
      • Setting the minimum processor idle power core C-State
      • Minimum Processor Idle Power Package C-State
      • Setting the Minimum Processor Idle Power Package C-State
      • Advanced Power Options
    • Configuring Performance Options
      • Performance Options
      • Intel (R) Turbo Boost Technology
      • Enabling or disabling Intel Turbo Boost Technology
      • ACPI SLIT Preferences
      • Enabling or disabling ACPI SLIT preferences
      • Advanced Performance Tuning Options
    • Configuring Server Security
      • Server Security options
      • Set Power On Password
      • Setting the power-on password
      • Set Admin Password
      • Setting an administrator password
      • One-Time Boot Menu (F11 Prompt)
      • Enabling or disabling the One-Time Boot Menu F11 prompt
      • No-Execute Protection
      • Enabling or disabling no-execute virus protection
      • Processor AES-NI Support
      • Enabling or disabling processor AES-NI support
      • Secure Boot
      • Secure Boot Settings
      • Advanced Secure Boot Options
      • Trusted Platform Module options
      • Enabling the Trusted Platform Module
    • Configuring PCI devices
      • PCI Device Enable/Disable
      • Enabling or disabling a PCI device
    • Configuring Server Availability
      • Server Availability options
      • ASR Status
      • Enabling or disabling ASR
      • ASR Timeout
      • Setting the ASR timeout
      • Wake-On LAN
      • Enabling or disabling Wake-On LAN
      • POST F1 Prompt
      • Setting the POST F1 prompt delay
      • Power Button Mode
      • Enabling or disabling momentary power button functionality
      • Automatic Power-On
      • Setting the automatic power-on state
      • Power-On Delay
      • Setting the power-on delay
    • Configuring BIOS serial console and EMS options
      • BIOS Serial Console and EMS options
      • BIOS Serial Console Emulation Mode
      • Setting the BIOS Serial Console Emulation Mode
      • EMS Console
      • Configuring the EMS console
    • Configuring Server Asset Information
      • Server Asset Information options
      • Server Information
      • Entering server information
      • Administrator Information
      • Entering administrator information
      • Service Contact Information
      • Entering service contact information
      • Custom POST Message
      • Entering a custom POST message
    • Configuring advanced platform configuration options
      • Advanced Options
      • ROM Selection
      • Selecting a ROM image
      • Embedded Video Connection
      • Configuring an embedded video connection
      • Fan and Thermal Options
      • Thermal Configuration
      • Setting the thermal configuration
      • Thermal Shutdown
      • Enabling or disabling thermal shutdown
      • Extended Ambient Temperature Support
      • Enabling or disabling higher ambient temperature support
      • Advanced System ROM Options
    • Configuring the date and time and system defaults
      • Setting the Date and Time
      • Resetting system defaults
  • Scripted configuration flows
    • Using scripted configuration flows
      • Scripted configuration flow
  • UEFI Shell Commands
    • Introduction
      • Commands and capabilities
      • Accessing the Embedded UEFI Shell
    • UEFI Shell command reference
      • Custom Hewlett Packard Enterprise Shell commands
      • Command line syntax examples
      • Getting started with the UEFI Shell
      • UEFI Shell commands
    • Running and editing UEFI Shell scripts
      • Methods for invoking scripts
      • Exporting and importing settings to files
      • Editing Shell scripts
      • Sample UEFI Shell scripts
    • UEFI Programming Model
    • UEFI Shell command status codes
  • Troubleshooting
    • Troubleshooting
      • Cannot boot devices in UEFI Mode
      • Cannot restore system defaults
      • Cannot download the file in the network boot
      • Cannot network boot with the downloaded image file
      • Cannot deploy from the UEFI Shell script
      • Cannot execute the Option ROM for one or more devices
      • Cannot find network or device in the boot order list
      • Invalid Server Serial Number and Product ID
      • Invalid time or date
  1. Home
  2. BIOS/Platform Configuration options
  3. Configuring Boot Options

Configuring Boot Options

  • Boot Options

  • Setting the boot order policy

  • UEFI Boot Order

  • Changing the UEFI boot order

  • Advanced UEFI Boot Maintenance