573-HPE Persistent Memory Configuration Error - Processor X

Symptom

573-HPE Persistent Memory Configuration Error - Processor X. At least one PMM with volatile capacity and one RDIMM/LRDIMM should be installed on each memory controller to support Memory Mode. System will operate in Application Direct Mode.

Cause

The current configuration does not support Memory Mode.

CAUTION:
Failure to properly handle DIMMs and HPE Persistent Memory modules can damage the memory components and the system board connector. For more information, see the handling guidelines in the troubleshooting guide for your product:
Action
  1. Install the HPE Persistent Memory modules (PMMs) and DIMMs in a supported configuration.
    For more information, see the server user guide for your product on the Hewlett Packard Enterprise website:

    For additional information, see the memory population rules on the Hewlett Packard Enterprise website (https://www.hpe.com/docs/memory-population-rules).

  2. Configure the HPE Persistent Memory modules with volatile capacity.

    For more information, see the HPE Persistent Memory User Guide on the Hewlett Packard Enterprise website (https://www.hpe.com/info/persistentmemory-docs).