Prerequisites
Before installing this option, be sure you have the following:
Procedure
-
Power down the
server (Power down the server).
-
Remove all power:
- Disconnect each power cord from the power source.
- Disconnect each power cord from the
server.
-
Do one of the following:
- Extend the
server from the rack (Extend the server from the rack).
- Remove the
server from the rack (Remove the server from the rack).
-
Remove the access panel (Remove the access panel).
-
Using a Torx T-10 screwdriver, remove the 4 LFF display port/USB blank.
-
Install the 4 LFF display port/USB module.
-
Route and connect the cable.
-
Install the access panel (Install the access panel).
-
Install the
server in the rack.
-
Connect each power cord to the
server.
-
Connect each power cord to the power source.
-
Power up the
server (Power up the server).