Configuring iLO service settings

The TCP/IP ports used by iLO are configurable, which enables compliance with site requirements and security initiatives for port settings. These settings do not affect the host system. The range of valid port values in iLO is from 1 to 65535. If you enter the number of a port that is in use, iLO prompts you to enter a different value.

You can enable or disable iLO features in the Service section of the Access Settings page.

Changing these settings usually requires configuration of the web browser used for standard and SSL communication. When these settings are changed, an iLO reset is required to activate the changes.

Prerequisites

Configure iLO Settings privilege

Procedure
  1. Click Security in the navigation tree.

    The Access Settings page is displayed.

  2. Update the service settings as needed.

    When you disable a service setting, iLO notifies you that the features that depend on the service setting will be unavailable if you apply the changes.

  3. Click Apply.

    iLO prompts you to confirm that you want to apply the changes and reset iLO.

  4. To apply the changes and reset iLO now, click Yes, apply and reset.

    It might take several minutes before you can re-establish a connection.