Subsystem and device status values

  • Redundant icon Redundant—There is a backup component for the device or subsystem.

  • OK icon OK—The device or subsystem is working correctly.

  • Not Redundant icon Not Redundant—There is no backup component for the device or subsystem.

  • Not Available icon Not Available—The component is not available or not installed.

  • Degraded icon Degraded—The device or subsystem is operating at a reduced capacity.

    iLO displays the power supply status as Degraded when mismatched power supplies are installed.

    If you power on a server with nonredundant fans or power supplies, the system health status is listed as OK. If a redundant fan or power supply fails while the system is powered on, the system health status is Degraded until you replace the fan or power supply.

  • Failed Redundant icon Failed Redundant—The device or subsystem is in a nonoperational state.

  • Failed icon Failed—One or more components of the device or subsystem are nonoperational.

  • Other icon Other—For more information, navigate to the System Information page of the component that is reporting this status.

  • Unknown icon  Unknown—The iLO firmware has not received device status information. After iLO is reset when the server is powered off, some subsystems display the status Unknown. iLO cannot update the status for these subsystems when the server is powered off.

  • Not Installed icon Not Installed—The subsystem or device is not installed.