Installing the two-post rack mount kit on a 19 inch rack column

Prerequisites

Before you perform this procedure, make sure that you have the following items available:

  • T-15 Torx screwdriver

  • T-25 Torx screwdriver

Procedure
  1. Position the stop brackets on the rear brackets.

    Place the stop brackets as per the width of the rack column.


    Placing the stop brackets
  2. Install the brackets on rack columns.

    Installing the brackets on the rack column
  3. Install the chassis on the rack.

    Make sure that the stop brackets are slid into the rear of the chassis.


    Installing the EL8000t chassis on the rack