2112-iSCSI Error - Failed to acquire DHCP Target Network Address

Symptom

2112-iSCSI Error - Failed to acquire DHCP Target Network Address.

Cause

  • Missing or improperly connected network cable

  • Incorrect configuration settings

Action
  1. Verify that the network cable is connected to this port.
  2. Verify that the DHCP server is reachable from the system.
  3. Verify that the DHCP server is able to provide the target settings required for the system, such as: IP address, port number, and target IQN.
  4. Verify that the DHCP server is not busy.
  5. Reboot the server, and try again.
  6. If the issue persists, open a support case using the Hewlett Packard Enterprise Support Center website (https://www.hpe.com/support/hpesc).