Full-height half-length PCIe riser board and cage

To remove the component:

Procedure

  1. Power down the server .
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Do one of the following:
  4. Remove the access panel.
  5. Disconnect all cables connected to existing expansion boards.
  6. Remove the PCI riser cage.


    Remove the PCI riser cage

  7. Remove any existing expansion board from the riser board.
  8. Remove the riser board from the cage.


    Remove the riser board from the cage

To replace the component, reverse the removal procedure.