Removing and replacing the system battery

Procedure
  1. Power down the server.
  2. Disconnect all peripheral cables from the server.
  3. Remove the server from the chassis.
  4. Remove the bayonet board.
  5. Remove the three-slot secondary riser cage.
  6. If installed, remove the primary PCI riser cage.
  7. Locate the battery on the system board.
  8. Slightly push the metal tab, and then remove the system battery from the socket.

    Removing the system battery
  9. Slightly push the metal tab, and then install the new system battery in the socket.

    Installing the system battery
  10. Install the three-slot secondary riser cage
  11. Install the bayonet board.
  12. Install the server into the chassis.
  13. Connect all peripheral cables to the server.
  14. Power up the server.
  15. Properly dispose of the old battery. For more information about proper battery disposal, contact an authorized reseller or an authorized service provider.