Using an SUV cable to access USB drives in a KVM setup

The USB connectors on the SUV cable do not support USB devices that require a power source greater than 500 mA at 5 V. When accessing this type of USB drives, such as a USB key or a USB optical drive, use a USB hub in a KVM setup.

Procedure
  1. Connect the SUV cable to the SUV port.
  2. Connect a monitor to the video connector.
  3. Connect a USB hub to the USB connector.
  4. Connect a USB mouse to the USB hub.
  5. Connect a USB keyboard to the USB hub.
  6. Connect a USB key or a USB optical drive to the USB hub.

    Using an SUV cable to access USB drives in a KVM setup