Prerequisites
To install the front panel/drive cage assembly, you need a T-15 Torx screwdriver.
Procedure
-
Install the front panel/drive cage assembly:
- Extend the serial label pull tab from the front of the
server blade.
- Align the pins on the chassis and slide the front panel/drive cage assembly into the
server blade.
- Secure the assembly with two T-15 screws.
- Close the serial label pull tab.
-
Install the DIMM baffles.
-
Do one of the following:
-
Install the access panel.
-
Install the server blade.
-
Power up the server blade.