Install the DIMM baffles

The server has two DIMM baffles.

Procedure
  1. Align and install the DIMM baffle:
    IMPORTANT:

    When installing each DIMM baffle, be sure that the alignment tabs engage with the side of the server blade.

    • DIMM baffle (right side)
    • DIMM baffle (left side)
  2. If removed, install the internal USB drive.

    To locate the internal USB connector, see System board components.

  3. If removed, install the direct connect SATA cable (Install the direct connect SATA cable.
  4. Install the access panel.
  5. Install the server blade.
  6. Power up the server blade.