Prerequisites
To remove an M.2 SSD from the M.2 riser, you need a No. 1 Phillips screwdriver.
Procedure
-
Power down the server blade.
-
Remove the server blade.
-
Place the
server blade on a flat, level work surface.
-
Remove the access panel.
-
Remove the left DIMM baffle from the
server blade (Remove the DIMM baffles).
-
Remove the M.2 SSD from the M.2 riser board. Use a No. 1 Phillips screwdriver to disengage the screw.
-
If necessary, repeat the M.2 SSD removal procedure for a second drive.