Prerequisites
Before installing the
server node in the
chassis, be sure to do the following:
Procedure
-
Unbox the
server node and verify the contents:
- Server node
- Documentation
-
(Optional) Install the
server hardware options. For installation instructions, see
Hardware options installation.
-
Install the
server into the
chassis.
-
Connect all peripheral cables to the servers and chassis.
-
Connect each power cord to the chassis.
-
Connect each power cord to the power source.
-
Decide how to manage the
server:
- To manage the
server locally,
use an SUV cable for a KVM setup.
- To manage the
server remotely, you will need a remote browser to connect to the AMI
MegaRAC SP-X GUI.
Verify that a network cable is connected to the dedicated management NIC port.
Locate the
BMC IP address:
If a DHCP
server assigns the IP address,
locate the IP address.
If a static IP address is assigned, use that IP address.
In a remote browser, type the IP address, and then press
Enter.
- In the AMI
MegaRAC SP-X GUI login page, enter the factory default BMC user name and password, and then click
Login.
- In the
Dashboard menu, click
Launch.
The remote management Java console window appears.
-
Do one of the following:
If you are managing the
server locally, press the Power On/Standby button.
If you are managing the
server remotely, in the AMI
MegaRAC SP-X GUI:
Select
Remote Control
>
Server Power Control.
Select a power on action.
Click
Perform Action.
-
Deploy an OS or virtualization software.
-
As a best practice,
Hewlett Packard Enterprise recommends that you install the latest firmware, drivers, and system software before using the server for the first time.
-
Register the system (https://myenterpriselicense.hpe.com).