Prerequisites
Before you perform this procedure, make sure that you have a Phillips No. 2 screwdriver available.
Procedure
-
Power down the server.
-
Disconnect all peripheral cables from the server.
-
Remove the server from the chassis.
-
Remove the expansion cage.
-
Install the SSD:
- Insert the SSD into the M.2 slot at a 45° angle.
- Carefully press the SSD down to the horizontal position.
- Install the SSD mounting screw.
-
Install the expansion cage.
-
Install the server into the chassis.
-
Connect all peripheral cables to the server.
-
Power up the server.
-
To configure the M.2 SATA SSDs, see the
OS software RAID documentation.
The installation is complete.