Removing the primary PCI riser blank

Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank.
Procedure
  1. Back up all server data.
  2. If installed, remove the bezel.
  3. Power down the server.
  4. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  5. Do one of the following:
  6. Remove the access panel.
  7. Remove the primary PCI riser blank:

    Removing the primary PCI riser blank