Removing the secondary PCI riser cage

Procedure

Observe the following alerts:
CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC power cords before removing or installing the PCI riser cage.

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank.
Back up all server data.
If installed, remove the bezel.
Power down the server.
Remove all power:
1. Disconnect each power cord from the power source.
2. Disconnect each power cord from the server.
Do one of the following:
- Extend the server from the rack.
- Remove the server from the rack.
Remove the access panel.
Do one of the following:
- Remove the primary PCI riser blank.
- Remove the primary PCI riser cage.
Disconnect any cables connected to the PCI riser cage.
Remove any expansion boards installed in the PCI riser cage.
Remove the PCI riser cage.