Install the system board assembly

Prerequisites

Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.

Procedure
  1. Slide the system board assembly into the chassis.
  2. Press against the system board assembly until it clicks into place.
  3. Install the system board assembly screw.
    Installing the system board assembly
  4. Connect the following system cables:

    • Power supply cable

    • Optical drive or SSD SATA cable (optional)

    • LFF/SFF drive SATA cable – This cable can either be connected to the system board or to an installed Smart Array storage controller board.

    • Fan cable

    Connecting the system cables
  5. If removed, install the internal USB device.