Install an internal USB device

Procedure
  1. Power down the server.
  2. Disconnect the power cord from the AC source, and then from the server.
  3. Disconnect all peripheral cables from the server.
  4. Remove the chassis cover.
  5. Plug in the USB device into the internal USB port.
    Installing an internal USB device
  6. Install the chassis cover.
  7. Connect all peripheral cables to the server.
  8. Connect the power cord to the server power jack, and then to the AC source.
  9. Power up the server.

For more information on any required setup or configuration procedure, see the USB device documentation.