Drive support information

  • This server has four drive bays that support:

    • LFF non-hot-plug drives. The maximum LFF drive capacity is 16 TB (4 x 4 TB).

    • SFF non-hot-plug drives. This drive configuration requires the SFF-to-LFF drive converter option.

    These drives are not designed to be installed or removed from the server while the system is still powered on. Power off the server before installing or removing a drive.

  • The embedded Marvell 88SE9230 PCIe to SATA 6Gb/s Controller supports SATA drives only. RAID 0, 1, and 10 levels are supported.

    To configure drives connected to the onboard LFF/SFF drive SATA port, use the Marvell BIOS Utility or the Marvell Storage Utility .

  • For SAS drive and advanced RAID support, install an HPE Smart Array Gen10 type-p SR controller option.

    To configure drives connected to the Smart Array controller option, use the HPE Smart Storage Administrator.