Accessing the Marvell BIOS Utility under UEFI boot mode
The UEFI boot mode is the server default boot mode.
Prerequisites
Accessing the MBU using the
RAID command in the UEFI
Shell
prompt requires system BIOS version A330 or later. If needed,
update the system BIOS.
Procedure
- Reboot the server.
- During POST, press the Delete key.
- From the Aptio Setup Utility screen, select Save & Exit tab > UEFI: Built-in EFI Shell, and then press the Enter key.
-
At the
Shell
prompt, type RAID, and then press the Enter key.