Setting the static IP address using the serial console cable

Procedure
  1. Access the System Utilities menu.
  2. Navigate through the menu options System Configuration > iLO 4 Configuration Utility > Network Options. The Network Options screen displays.
  3. Change DHCP Enable to OFF.
  4. Configure the IP Address, Subnet Mask, and Gateway Address as required. The following image is an example of a completed Network Options screen.


    Network options screen completed

  5. Once completed, press ESC to back out of the menus. Save the settings when prompted.
  6. After saving all settings, iLO prompts for a reset in order for the new settings to be used. Reset the system.