Installing a full-length mini-PCIe LTE module
Procedure
- Power down the system.
- Remove the cartridge, if installed.
- Remove the access panel.
- Align the full-length mini-PCIe module with the full-length slot on the mini-PCIe adapter board.
- Insert the mini-PCIe module connector into the slot.
-
Using a Phillips screwdriver, insert and tighten the two screws to secure the mini-PCIe module to the board.
- Install the two internal antenna cables on the antenna connectors on the module.
-
Install the two internal antenna cables to the antenna connector ports.
For antenna connector locations, see PCI right side components or PXI right side components.
- Install the antenna.