After you replace the system board, the
system serial number and the product ID must be configured:
Procedure
-
Access System Utilities. During POST, press
F9.
-
On the System Utilities home screen, select
.
-
Select the Serial Number field and press
Enter.
The following alert appears:
The serial number is modified by qualified service personnel and must match the serial number located on the chassis.
-
Click
OK.
-
Type the serial number and press
Enter.
-
Select the Product ID field and press
Enter.
The following alert appears:
Product ID is modified only by qualified personnel. This value must match the product ID located on the chassis.
-
Type the product ID and press
Enter.
-
Press
F10
to save the configuration.
The procedure is complete.