Remove the three-slot secondary riser cage thermal brackets

CAUTION:

To prevent improper cooling and thermal damage, do not operate the server unless the correct thermal brackets are installed.

Prerequisites

Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.

Procedure
  1. Remove the rear thermal bracket.

    Removing the rear thermal bracket
  2. Remove the middle thermal bracket.

    Removing the middle thermal bracket
  3. Remove the side bracket.

    Removing the side bracket
  4. If installed, remove the riser slot 4 thermal bracket.

    Removing the riser slot 4 thermal bracket