Removing and replacing a DIMM

CAUTION:

Before replacing a DIMM, expansion board, or other similar PCA components due to a perceived hardware error, make sure first that the component is firmly seated in the slot. Do not bend or flex circuit boards when reseating components.

Procedure
  1. Power down the server.
  2. Disconnect all peripheral cables from the server.
  3. Remove the server from the chassis.
  4. Remove the bayonet board.
  5. Remove the three-slot secondary riser cage.
  6. Remove the DIMM.

    Removing a DIMM

To replace the component, reverse the removal procedure.

For DIMM configuration information, see the Hewlett Packard Enterprise website (https://www.hpe.com/docs/arm-population-rules).