Front panel LEDs and button
Item | Description | Status | Definition |
---|---|---|---|
1 | Drive activity LED1 | Flashing green | Ongoing drive activity |
Off | No drive activity | ||
2 | NIC status LED2, 3 | Solid green | Linked to network |
Flashing green | Network active | ||
Off | No network activity | ||
3 | Health LED3 | Solid green | Normal |
Flashing green | iLO is rebooting | ||
Flashing amber | System degraded4 | ||
Flashing red | System critical4 | ||
4 | Power on/Standby button and system power LED3 | Solid green | System on and normal operation |
Flashing green | Performing power-on sequence | ||
Amber | System in standby | ||
Off | No power present5 |
1
This LED only reflects the status of drives that are connected to the onboard SATA port.
2
This LED reflects the status of the onboard NIC ports managed by the embedded Intel I350-AM4 Ethernet Controller.
3
When these LEDs flash simultaneously, a power fault has occurred. For more information, see
Front panel LED power fault codes.4
If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
5
Facility power is not present, power cord is not attached, or power supply failure has occurred.