1
|
TPM connector
|
This connector supports the HPE Trusted Platform Module 2.0 Gen10 option (864279-B21) for data security.
|
2
|
Fan connector
|
Connects the fan cable.
|
3
|
Riser connector
|
Connects the system riser board.
|
4
|
System maintenance switch
|
Use this switch to physically configure various server settings.
|
5
|
SATA 6GB/s port
|
Connects the drive SATA cable.
|
6
|
Drive sideband connector
|
Connects the drive sideband signal cable.
|
7
|
Drive power connector
|
Connects the drive power cable.
|
8
|
CMOS header
|
Use this header to clear the CMOS and reset the BIOS settings to their factory default values.
|
9
|
System battery
|
This battery provides power to the server CMOS and real-time clock.
|
10
|
DIMM slot 1B
|
This slot supports standard UDIMMs with ECC only.
|
11
|
DIMM slot 2A
|
This slot supports standard UDIMMs with ECC only. If only one UDIMM is installed, install it in this slot.
|
12
|
Internal USB 2.0 port
|
Connect a USB device, such as a USB security key or a USB drive key, intended for permanent use. The internal connection avoids issues of clearance on the front or rear of the server and prevents physical access to secure data.
|